Scrigno
Design object made of stainless steel with mirror finish.
The structure was made entirely by hand and is formed by the union of 92 triangles for a total of 5.5 square meters of steel with three different sides, which together form a closed figure. Each triangle is made to measure during construction, with the necessary measurements depending on the space created between the various triangles. This makes the identical repetition of the object impossible, which thus remains a single piece. At the closing of some triangles, a steel side is replaced by an element in solid “Noce Canaletto” wood that forms a sort of door of a drawer that can be opened to allow the insertion of small objects. The interior of the opening compartment is also handcrafted covered in “Noce Canaletto” wood with the insertion of concealed hinges.
Scrigno is housed on a “Noce Canaletto” wood pedestal that highlights all its craftsmanship.
Approximate dimensions (cm)
L 120 for h80 d95 approx. weight kg 50.
Maintenance
Clean with a soft wool and never with fabrics that are too robust. If necessary, very fine grain stainless steel polishing creams can be used. The wooden support will be sufficient to wipe it with a wool cloth, or if it is necessary wool dampened with natural wax for wood and waste it with clean wool cloth to remove any hair left from wax.
Each Superfine product is made entirely by hand with artisanal techniques that give the characteristics of greater value. Therefore any imperfection found in the finishes and dimensions are not to be considered anomalies but a guarantee of uniqueness of the individual items.